tools for removing a-arm
2 posters
Page 1 of 1
tools for removing a-arm
Does anyone have or know where to get these tools, accordding to the manual part#s are j-8808 and j-8907. probably can make them but would be a lot easier to buy.
custom880- Posts : 161
Join date : 2017-01-04
Re: tools for removing a-arm
Yep -- try these two fellas - they probably can fix you up. Start with the #1 guy ( Bill ) though - he quoted me WAYYY cheaper on the 8808 ( $15+/- ) but I got in a hurry and didn't wait for his response ( #2 guy was much quicker and I thought it was going to be near impossible to find -- turns out I was wrong lol )
1. bill sawrey <toolzguy@att.net>
2. Sales@penybonttools.com
1. bill sawrey <toolzguy@att.net>
2. Sales@penybonttools.com
regal81455- Admin
- Posts : 565
Join date : 2014-12-29
Age : 45
Location : BFE, IL
Re: tools for removing a-arm
BTW I documented what the 8808 is dimensionally for the board in case someone was in a pinch, might be able to make one if you're not wanting to wait. Here's the link, see the very last post...
https://skylark616263.forumotion.com/t270-j-8808-lower-control-arm-spacer-tool
https://skylark616263.forumotion.com/t270-j-8808-lower-control-arm-spacer-tool
regal81455- Admin
- Posts : 565
Join date : 2014-12-29
Age : 45
Location : BFE, IL
Similar topics
» More Fluids and Tools at RockAuto.com!
» Removing Front Subframe
» removing rear bumper- 62 special
» Removing Pinchweld molding on 62’ Skylark convertible
» Removing Front Subframe
» removing rear bumper- 62 special
» Removing Pinchweld molding on 62’ Skylark convertible
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|